Plastic HDPE Geocell with Honeycomb Structure for Driveway, Slope, And Gravel Base Reinforcement – Multiple Height Specifications

Why Geocell
In roads, rail,wers, slope applications, and similar constructions we sometimes encounter soft and/or weak. The traditional approach is to fill these areas with expensive materials, which can be costly and time-consuming. However, there is an effective alternative method: using geocell directly on the subgrade. Geocell is made of ultrasonically-welded high-density polyethylene (HDPE) and can be expanded to form a honeycomb structure. Cells are then filled with readily available granular materials and compacted. The Geoc solution addresses soil stability problems in various applications through its high-strength network of interconnected cells.
How Geocell Works
When infilled with compacted materials, it creates a new composite entity that possesses enhanced mechanical and geotechn properties. When the soil contained within aell is subjected to pressure, it causes lateral stresses on the cell walls. 3D zone of confinement reduces the lateral movement of soil particles, while vertical loading on the contained infill results in high lateral stress and resistance the cell-soil interface. increase the shear strength of the confined soil, which:

- Creates a stiff mattress or slab to distribute the load over a wider area.
- Reduces punching of soft soil.
-creases shear resistance and bearing capacity.
- Decreases deformation.

Confinement from adjacent cells provides additional resistance against the loaded cell through passive resistance, while expansion of the infill is r